Connection tips

Connection and Maintenance
Inspect Equipment Regularly: Check your hoses for signs of cracking, brittleness, or wear. Hoses should generally be replaced every two to three years.
Use the Right Tools: Only use approved regulators and high-quality hoses specifically designed for LP gas.
Hand-Tighten Only: When connecting a new cylinder, ensure the connection is firm but avoid over-tightening with heavy tools, which can damage the seals.

Leak detection

Checking for Leaks
The Soapy Water Test: Never use a flame to check for leaks. Instead, apply a solution of soapy water to the valves and connections. If bubbles form, there is a leak that needs immediate attention.
Trust Your Senses: LP gas has a distinctive "rotten egg" smell added to it. If you detect this odor, immediately extinguish all flames and turn off the cylinder valve.
Safe Shutdown: In the event of a leak, do not operate electrical switches or telephones in the vicinity, as a small spark could ignite the gas.

Storage & Handeling

Proper Storage and Handling
Always Store Upright: Gas cylinders must always be stored and transported in an upright position to ensure the safety relief valve functions correctly.
Ventilation is Key: Never store or use LP gas cylinders in unventilated areas, basements, or under stairs. Ensure there is always a steady flow of fresh air.
Keep it Cool: Store cylinders away from direct heat sources, open flames, or electrical sockets.

Service

Professional Field Services
Expert Assistance: If you are unsure about an installation or the integrity of your setup, contact professional field services for a technical inspection.
Certified Refills: Always source your gas from a reputable distributor like GDFS to ensure that your cylinders have been filled to the correct weight and safety standards.
Safety First: If you suspect a major leak or cannot stop the flow of gas, evacuate the area immediately and contact emergency services or your local GDFS representative.